Skip to main content

1984

Columbia-Wrightsville Bridge
Society: ASCEMain Category: CivilSub Category: BridgesEra: 1930-1939DateCreated: 1930Veterans Memorial BridgeWest HempfieldState: PACountry: USAWebsite: http://www.asce.org/Project/Columbia-Wrightsville-Bridge/Creator: Long, James , Wiley-Maxon Construction Company

The total length of the Columbia-Wrightsville Bridge is 7,374 feet. Its construction required 100,000 cubic yards of concrete and 8 million pounds of steel reinforcing rods.

YearAdded:
1984
Image Credit: Courtesy Flickr/Gerry Dincher (CC BY-SA 2.0)Image Caption: Columbia-Wrightsville BridgeEra_date_from: 1930
Columbia River Scenic Highway
Society: ASCEMain Category: CivilSub Category: Roads & RailsEra: 1920-1929DateCreated: 1922Columbia River HwyCascade LocksState: ORZip: 97014Country: USAWebsite: http://www.asce.org/project/columbia-(old)-river-scenic-highway/Creator: Lancaster, Samuel , Hill, Samuel

A project that combined great engineering ambition and burgeoning civic pride, the Columbia River Highway was built at the dawn of the automobile age out of a desire to bring greater attention to the growing population and natural beauty of the Pacific Northwest. By the time of its completion in the 1920s, the 73.8-mile highway had become a textbook example of modern highway construction and an important commercial and recreational link between Oregon's coastal Willamette Valley and the inland areas of eastern Oregon and Washington. 

YearAdded:
1984
Image Credit: Courtesy Flickr/Doug Kerr (CC BY-SA 2.0)Image Caption: Columbia River Scenic HighwayEra_date_from: 1922
Society: ASMEMain Category: Electric, MechanicalSub Category: SteamEra: 1940-1949DateCreated: 1949 Plant of General Electric CoSchenectadyState: NYZip: 12306Country: USAWebsite: http://www.asme.org/about-asme/history/landmarks/topics-a-l/electric-power-production-steam/-100-belle-isle-gas-turbine-%281949%29, http://files.asme.org/asmeorg/Communities/History/Landmarks/5501.pdfCreator: Oklahoma Gas & Electric Company
This unit, retired from the Belle Isle Station of the Oklahoma Gas & Electric Company, was the first gas turbine to be used for electric utility power generation in the United States. It represents the transformation of the early aircraft gas turbine, in which the engines seldom ran more than ten hours at a stretch, into a long-life prime mover. This redesign was based upon creep-rupture tests of S-816 cobalt-base alloys for turbine buckets. The low-cost trouble-free service led to wide-scale adoption of the gas turbine, over 45 million kilowatt capacity (over 9 percent of U.S.
YearAdded:
1984
Image Credit: Image Courtesy of ASMEImage Caption: Belle Isle Gas Turbine on static display in Schenectady, New YorkEra_date_from: 1949
IBM 350 RAMAC Disk File
Society: ASMEMain Category: MechanicalSub Category: Communications and Data ProcessingEra: 1950-1959DateCreated: 1956IBM Building 12San JoseState: CAZip: 95193Country: USAWebsite: http://www.asme.org/about-asme/history/landmarks/topics-a-l/communications-and-data-processing/-90-ibm-350-ramac-disk-file-%281956%29, http://www.magneticdiskheritagecenter.org/MDHC/RAMACBrochure.pdfCreator: IBM

The IBM 350 disk drive storage development led to the breakthrough of on-line computer systems by providing the first storage device with random access to large volumes of data. Since its introduction on September 4, 1956, it has become the primary computer bulk-storage medium, displacing punched cards and magnetic tapes and making possible the use of the computer in such areas as airline reservations, automated banking, medical diagnosis, and space flights.

YearAdded:
1984
Image Credit: Public Domain (US Army)Image Caption: IBM 350 RAMAC Disk FileEra_date_from: 1956
Norfolk & Western #611, Class J Steam Locomotive
Society: ASMEMain Category: MechanicalSub Category: Rail TransportationEra: 1940-1949DateCreated: 1941Virginia Museum of TransportationRoanokeState: VAZip: 24016Country: USAWebsite: http://www.asme.org/about-asme/history/landmarks/topics-m-z/rail-transportation---1/-94-norfolk---western--611,-class-j-steam-locomoti, http://files.asme.org/ASMEORG/Communities/History/Landmarks/5609.pdfCreator: Norfolk & Western

Developed for use in both the plains and mountains, this coal-fired passenger locomotive was among the most advanced in design, construction, and performance of any 4-8-4. Designed by Norfolk & Western engineers and built in the Norfolk & Western Roanoke shops, the 611 was specially balanced to minimize rail damage at high speeds. No. 611, eleventh of fourteen constructed and the last survivor, was retired from service and donated to the Roanoke Transportation Museum in 1959.

YearAdded:
1984
Image Credit: Public Domain (National Park Service)Image Caption: Norfolk & Western #611, Class J Steam LocomotiveEra_date_from: 1941
First practical US helicopter, pioneering the single-main-rotor concept
Society: ASMEMain Category: MechanicalSub Category: Air and Space TransportationEra: 1930-1939DateCreated: 1939Henry Ford MuseumDearbornState: MIZip: 48214Country: USAWebsite: http://www.asme.org/about-asme/history/landmarks/topics-a-l/air-and-space-transportation/-95-sikorsky-vs-300-helicopter-%281939%29, https://www.asme.org/getmedia/b997b811-c5c4-44e3-87d3-239bda559734/95-Sikorsky-VS-300-Helicopter.aspxCreator: Sikorsky, Igor I.

America's first practical helicopter, it pioneered the single main rotor concept that became the predominant helicopter configuration throughout the world. The principles that were developed and demonstrated by the VS-300 had direct application in the design of the early mass-production helicopter, marking the beginning of the world's rotorcraft industry.

The initial flight of the VS-300 was piloted by its designer, Igor I. Sikorsky (1889-1972), on September 14, 1939, in Stratford, Connecticut.

YearAdded:
1984
Image Credit: Courtesy ASMEImage Caption: Sikorsky VS-300 HelicopterEra_date_from: 1939
Quincy Mining Company No. 2 Mine Hoist
Society: ASMEMain Category: MechanicalSub Category: Materials Handling & ExtractionEra: 1920-1929DateCreated: 1920The Quincy Mine Hoist AssociationHancockState: MIZip: 49930Country: USAWebsite: https://www.asme.org/about-asme/who-we-are/engineering-history/landmarks/96-quincy-mining-company-no-2-mine-hoist, https://www.asme.org/getmedia/a59133b1-6a0e-4305-9e3d-096da65f88b1/96-Quincy-Mining-Company-No2-Mine-Hoist.aspxCreator: Quincy Mine Company

The largest mine hoist in the world, it serves the two incline skipways of Shaft No. 2, almost 9,300 feet long. The overhead winding drum has a diameter of 30 feet, of which the cylindrical center section is 10 feet long. The two 10-foot long end sections taper down to a 15-foot diameter. Wire hoisting ropes (almost 27 tons) could be wound onto a small end of the cylindrical drum as the other rope unwound from the cylindrical section.

YearAdded:
1984
Image Credit: Public DomainImage Caption: Quincy Mine No 2 Hoist House. Two cooling ponds sat alongside the hoist house which served the cross-compound condensed Nordberg engine. After passing through the condenser, hot water went through sprays to be cooled before recycling.Era_date_from: 1920
Idols Station, Fries Manufacturing & Power Company
Society: ASMEMain Category: Electric, MechanicalSub Category: WaterEra: 1890-1899DateCreated: 1898Duke Power Company-Winston-SalemState: NCZip: 27012Country: USAWebsite: http://www.asme.org/about-asme/history/landmarks/topics-a-l/electric-power-production-water/-99-idols-station,-fries-manufacturing---power-comCreator: Fries Manufacturing and Power Company

This run-of-the-river plant is a typical example of late nineteenth-century small-scale (750 kilowatt) low-head hydroelectric power technology. The Fries Manufacturing and Power Company began operating the Idol's Station on April 18, 1898, making it the first commercial hydroelectric plant in North Carolina involving long-distance power transmission, fourteen-miles distance at 10,000 volts. Idol's was an important power source for transportation, lighting, and industry in the Winston-Salem area.

YearAdded:
1984
Image Credit: Courtesy ASMEImage Caption: Idols Station, Fries Manufacturing & Power CompanyEra_date_from: 1898
Lowell Waterpower System
Society: ASCEMain Category: CivilSub Category: Power GenerationEra: 1800-1829DateCreated: 1821 National Historical ParkLowellState: MAZip: 01854Country: USAWebsite: http://www.asce.org/Project/Lowell-Waterpower-System/Creator: Francis, James B.

Much of the sophisticated system of canals, dams, gates, and tunnels built to manage water power in 19th-century Lowell is preserved today as the basis of the Lowell National Historical Park and the Lowell Heritage State Park. Pictured above is the Boott Penstock, an early channel adjacent to the Boott Mills (right).

YearAdded:
1984
Image Credit: Courtesy Flickr/Leonora Enking (CC BY-SA 2.0)Image Caption: Lowell Waterpower System: Pawtucket GatehouseEra_date_from: 1821
Subscribe to 1984

Innovations

We hope you enjoyed this essay.

Please support America's only magazine of the history of engineering and innovation, and the volunteers that sustain it with a donation to Invention & Technology.

Donate

Stay informed - subscribe to our newsletter.
The subscriber's email address.