Skip to main content

USA

Society: ASMEMain Category: MechanicalSub Category: PumpingEra: 1890-1899DateCreated: 1890sYork Water CompanyYorkState: PAZip: 17401Country: USAWebsite: https://www.asme.org/about-asme/who-we-are/engineering-history/landmarks/77-worthington-horizontal-cross-compound-pumping, https://www.asme.org/getmedia/8943cdf5-6cab-4567-b165-42f489334684/77-Worthington-Horizontal-Cross-compound-Pumping.aspxCreator: Corliss, George H.

Smaller and cheaper than a triple-expansion vertical engine, the horizontal cross-compound pumping engine, Pump No. 2, ran at relatively slow revolutions and was considered the height of engineering from the 1890s to World War I. This pumping engine at the York Water Company was built by the Worthington Pump & Machinery Corporation, Snow-Holly Works, Buffalo, New York.

YearAdded:
1982
Era_date_from: 1890s
Xerography
Society: ASMEMain Category: MechanicalSub Category: Communications and Data ProcessingEra: 1940-1949DateCreated: 1948Battelle Memorial InstituteColumbusState: OHZip: 43201-2693Country: USAWebsite: http://www.asme.org/about-asme/history/landmarks/topics-a-l/communications-and-data-processing/-88-xerography-%281948%29-, https://www.asme.org/getmedia/540c9932-b7e2-4884-8060-de35b8146064/88-Xerography.aspxCreator: Carlson, Chester

The convenient dry-copying process for printed pages is among the truly revolutionary inventions of the century. In 1937 Chester Carlson, a New York patent attorney, developed the concept of applying an electrostatic charge on a plate coated with a photoconductive material. On November 22, 1938, Carlson dusted powder dyed with evergreen spores across an exposed plate and transferred the imprint to the surface of a paper.

YearAdded:
1983
Image Credit: Courtesy Xerox CorporationImage Caption: XerographyEra_date_from: 1948
Society: AIAAMain Category: Aerospace & AviationSub Category: ResearchEra: 1940-1949DateCreated: 19464455 Genesee StreetBuffaloState: NYZip: 14225Country: USAWebsite: https://www.aiaa.org/uploadedFiles/About_AIAA/News_Room/Cornell_PR2010.pdfCreator: Wright Brothers, Curtiss, Glenn

Tracing its history to the earliest days of powered flight – to the Wright brothers and Glenn Curtiss – the site began as the research laboratory of the Curtiss-Wright Aircraft Company. After World War II, it was donated to Cornell University, and in January 1946 opened its doors as the Cornell Aeronautical Laboratory. Nearly every military aircraft and space vehicle developed in the United States from the end of World War II until the present day has been tested at the facility, now known as Calspan.

YearAdded:
2010
Image Caption: Ronald Patterson, a Cornell Aeronautical Labs technician, poses with a prototype of the lab's famous "man-amplifier" concept in 1961.Era_date_from: 1946
Wright Flyer III
Society: ASMEMain Category: MechanicalSub Category: Air and Space TransportationEra: 1900-1909DateCreated: 1905 Aviation Heritage Natl Hist ParkDaytonState: OHZip: 45409Country: USAWebsite: https://www.asme.org/about-asme/who-we-are/engineering-history/landmarks/224-wright-flyer-iii, https://www.asme.org/getmedia/3764d124-ce32-4335-bbac-24836c780066/224-Wright-Flyer-III.aspxCreator: Wright, Wilbur, Wright, Orville

The 1905 Wright Flyer III, built by Wilbur (1867-1912) and Orville (1871-1948) Wright, was the world's first airplane capable of sustained, maneuverable flight. Similar in design to their celebrated first airplane, this machine featured a stronger structure, a larger engine turning new "bent-end" propellers, and greater control-surface area for improved safety and maneuverability.

YearAdded:
2003
Image Credit: Public Domain (Copyright Expr.)Image Caption: Wright Flyer IIIEra_date_from: 1905
Corliss steam engine
Society: ASMEMain Category: MechanicalSub Category: SteamEra: 1960-1969DateCreated: 19641300 Frenchtown RdEast GreenwichState: RIZip: 02818Country: USAWebsite: http://www.asme.org/about-asme/history/landmarks/topics-a-l/electric-power-production-steam/-164-new-england-wireless-and-steam-museum, https://www.asme.org/getmedia/311b4c58-18b4-4842-9f8b-18a866e6ad13/164-New-England-Wireless-and-Steam-Museum.aspxCreator: Merriam, Robert

Stationary steam engines, once the prime movers of industry, powered trains, ships, and mills in an age when there was no electric power. By the 19th century, American industry, especially in England, was rapidly outgrowing the capacity of the ater power that had been its principal prime mover. The need for a new power source inspired an intense development of the steam engine, the work of inventors directed mainly at imporving fuel efficiency by reducing steam consumption. The leader in this effort was George H.

YearAdded:
1992
Image Credit: Courtesy Wikicommons/The-daffodil (CC BY-SA 4.0)Image Caption: Corliss steam engineEra_date_from: 1964
Williams-Miles History of Chemistry Collection
Society: ACSMain Category: ChemicalSub Category: Cradles of ChemistryEra: 1890-1899Brackett LibrarySearcyState: ARZip: 72143Country: USAWebsite: http://portal.acs.org/portal/acs/corg/content?_nfpb=true&_pageLabel=PP_SUPERARTICLE&node_id=760&use_sec=false&sec_url_var=region1&__uuid=f42addef-aaae-4d38-a0d9-841ae6f3cc1d, https://www.acs.org/content/dam/acsorg/education/whatischemistry/landmarks/williams-milescollection/williams-miles-chemistry-collection-at-harding-university-commemorative-booklet.pdfCreator: Miles, Wyndham , National Institutes of Health

The Williams-Miles History of Chemistry Collection, established in 1992, is one of the leading historical collections of chemistry books in the southern United States. It represents a combined 70 years of scholarly collecting by Wyndham D. Miles, National Institutes of Health, Bethesda, Maryland, and William D. Williams, Professor of Chemistry at Harding University. More than 2,000 volumes published between 1600 and 1900 are preserved here; the collection is particularly strong in 19th-century works.

YearAdded:
1996
Image Credit: Courtesy ACSImage Caption: Williams-Miles History of Chemistry Collection at Harding University
Williamsburg Bridge
Society: ASCEMain Category: CivilSub Category: BridgesEra: 1900-1909DateCreated: 1903Williamsburg BridgeBrooklynState: NYZip: 11211Country: USAWebsite: http://www.asce.org/Project/Williamsburg-Bridge/Creator: Buck, Leffert , Lindenthal, Gustav

When opened in 1903, the 1,600 foot long main span of the Williamsburg Bridge was the world's longest suspension span, surpassing the nearby Brooklyn Bridge by only 4.5 feet. The Williamsburg Bridge remained the world's longest suspension bridge span for 21 years until the opening of the Bear Mountain Bridge in 1924. The Williamsburg Bridge has two unsuspended side spans of 596.5 feet, each supported from below by trussed towers, giving the bridge an overall length of 2,793 feet. The four main suspension cables are 18.75 inches in diameter and each composed of over 10,000 wires.

YearAdded:
2009
Image Credit: Courtesy Flickr/Kev Gilmour (CC BY 2.0)Image Caption: Williamsburg BridgeEra_date_from: 1903
Wilkinson Mill
Society: SME (manufacturing)Main Category: ManufacturingSub Category: ManufacturingEra: 1800-1829DateCreated: 181067 Roosevelt AvenuePawtucketState: RIZip: 02860Country: USAWebsite: http://www.sme.org/Creator: Wilkinson, David , Wilkinson, Oziel

The Wilkinson Mill, situated on the west bank of the Blackstone River in Pawtucket, was built between 1810 and 1811 by machinist Oziel Wilkinson. Constructed in stone rubble, three and one-half stories high, the mill played a critical role in the history of textile technology, in steam power generation, and in the development of the machine tools industry. The Wilkinson family came to Pawtucket in the 1780s and set up a shop to forge anchors, build presses for oil works, and mold iron screws used in paper pressing machinery.

YearAdded:
1977
Image Credit: Courtesy Flickr/H.C. Williams (CC BY 2.0)Image Caption: Wilkinson MillEra_date_from: 1810
Wilkinson Mill
Society: ASMEMain Category: MechanicalSub Category: ManufacturingEra: 1800-1829DateCreated: 181067 Roosevelt AvenuePawtucketState: RIZip: 02860Country: USAWebsite: https://www.asme.org/about-asme/who-we-are/engineering-history/landmarks/30-wilkinson-mill, https://www.asme.org/getmedia/30a934f4-2025-47f2-ae87-760d94fe33d3/30-Wilkinson-Mill.aspxCreator: Wilkinson, David , Wilkinson, Oziel

The Wilkinson Mill, situated on the west bank of the Blackstone River in Pawtucket, was built between 1810 and 1811 by machinist Oziel Wilkinson. Constructed in stone rubble, three and one-half stories high, the mill played a critical role in the history of textile technology, in steam power generation, and in the development of the machine tools industry.

 

YearAdded:
1977
Image Credit: Courtesy Flickr/H.C. Williams (CC BY 2.0)Image Caption: Wilkinson MillEra_date_from: 1810
White River Concrete Arch Bridge
Society: ASCEMain Category: CivilSub Category: BridgesEra: 1930-1939DateCreated: 1930White RiverCotterState: ARZip: 72626Country: USAWebsite: http://www.asce.org/Project/White-River-Concrete-Arch-Bridge/Creator: Marsh, James Barney

When this 1,850-foot concrete-arch highway bridge was built on the White River in a remote region of northern Arkansas - prior to the construction of upriver, flood-control dams - flash floods occurred frequently, sometimes causing the water to rise as much as one foot per hour. Construction under these conditions presented a clear danger, so project managers specified both a design and an innovative construction method appropriate to the problem of building across a perilous stretch of unpredictable river.

YearAdded:
1986
Image Credit: Courtesy Flickr/jaystout (CC BY 2.0)Image Caption: White River Concrete Arch BridgeEra_date_from: 1930
Subscribe to USA

Innovations

Granite Railway

The Granite Railway Company of Quincy was the first commercial railway in the United States. Incorporated in 1826 and designed by Gridley Bryant, the railway relied on horses, rather than steam locomotives, to draw the cars along the tracks. Its primary purpose was to transport granite from…

Read More
Hoosac Tunnel

When first proposed in 1819, the Hoosac Tunnel seemed so logical. It would provide an efficient and direct route for the Boston and Albany Railroad, whose pathway meandered 20 miles along precipitous grades. Early proponents, however, could not have imagined that blasting a 4.75 mile tunnel…

Read More
Hudson and Manhattan Railroad Tunnel

A transportation tunnel under the Hudson River connecting Manhattan and New Jersey was first considered in the 1860s, fueled by New York City's rapidly growing congestion and the inadequacy of existing ferry service to population centers across the river. DeWitt Clinton Haskin, an engineer…

Read More
Horseshoe Curve

One of the earliest and most impressive of America's great railroad engineering feats, the Horseshoe Curve was built as a means of overcoming a straight-line grade over the geological feature known as the Allegheny Escarpment or Allegheny front, which separates the ridge-and-valley section of…

Read More
Hydraulic-Inclined Plane System of the Morris Canal

Morris Canal was built to transport coal from the Lehigh Valley of Pennsylvania to industrial markets in Newark and New York. The total length of the canal was 106 miles. The canal climbed an astonishing 914 feet from Newark Bay to the summit at Lake Hopatcong, and then dropped 760 feet to the…

Read More
Hydraulics Laboratory at the University of Iowa

The Hydraulics Laboratory at The University of Iowa, renovated in 2001 and in 2003 renamed the C. Maxwell Stanley Hydraulics Laboratory, is the oldest university-based hydraulics laboratory in the U.S. that continuously has focused on research, education, and service in hydraulic engineering.…

Read More
International Boundary Marker #1

William Emory was an 1831 graduate of the U.S. Military Academy at West Point. When the Mexican War broke out, he was assigned as chief engineer officer to General Stephen Kearny, whose army traversed largely unknown territories in the West. The U.S. War Department would later print 10,000…

Read More
Iron Building of the U.S. Army Arsenal

The Watervliet arsenal complex originally was built to house and manufacture weapons for the War of 1812. During the Civil War, it specialized in gun cartridges and artillery carriages. The facility today is a primary site for making state-of-the-art tank cannon, howitzers, mortars, and…

Read More
Joining of the Rails - Transcontinental Railroad

"May God continue the unity of our Country as this Railroad unites the two great Oceans of the world."  
- Inscription on the ceremonial Golden Spike 

The symbolic Golden Spike, staked in Promontory, Utah in 1869, marked the completion of the first transcontinental railroad,…

Read More
Lake Washington Ship Canal & Hiram M. Chittenden Locks

After more than 50 years of contention and debate, dredging began in 1911 on an eight-mile channel connecting Puget Sound, Seattle's gateway to the Pacific, to two inland freshwater lakes, Lake Washington and Lake Union. With the completion of the Lake Washington ship channel and Chittenden…

Read More
San Antonio River Walk & Flood Control System

San Antonio's River Walk, a catalyst for abundant commercial and tourism enterprise, is generally regarded by cities and urban planners throughout the world as a prototype for the development of urban riverfront sites. The River Walk's success, however, would not have been possible without a…

Read More
Stevens Pass Railroad Tunnels & Switchback System

In the years following the Civil War, the land west of the Mississippi River was being settled and the Pacific Northwest explored. There remained, however, a large portion of Montana, Idaho, and Washington that contained enormous quantities of timber and minerals, but was not accessible by rail…

Read More
Texas Commerce Bank Building

The tower was designed to rest on a continuous reinforced concrete mat, 4 feet thick, with the base of the slab 24 feet below street level.

What makes the Texas Commerce Bank Building revolutionary in the civil engineering world is not so much the building itself, but its foundation. …

Read More
Kansas City Park and Boulevard System

"Who in Europe, or in America for that matter, knows that Kansas City is one of the loveliest cities on earth? [...] the residential section is a masterpiece of city planning [...]; Few cities have been built with so much regard for beauty."  
- Andre Maurois, French author and lecturer…

Read More
Lacey V. Murrow Bridge and Mount Baker Ridge Tunnels

The 1.5 mile Lacey V. Murrow Bridge was the largest floating structure in the world and the first to be built of reinforced concrete when completed in 1940.  The bridge consisted of typically 300-foot long pontoons floated to site and rigidly connected to form a continuous structure and…

Read More
Missouri River Bridge

The Chamberlain is the only surviving bridge of the original five. The others were replaced as the river rose due to flood control dams put in place over time.

For its first 30 years of statehood, South Dakota was effectively two states. The Missouri river cut across the land forming a…

Read More
River des Peres Sewage & Drainage Works

In 1915, a tropical storm dropped nearly 11 inches of rain on St. Louis in just 17 hours, causing a devastating flood. Claiming 11 lives and the homes of 1,025 families, the flood focused public and government attention onto the problems of the river. 

In the early 1900s, St. Louis…

Read More
Vancouver's Mapping of the West Coast of North America

The voyage of Captain George Vancouver, 1791 -1795, was commissioned by the British Admiralty to map in detail the west coast of North America from Mexico to Alaska and to meet with Spanish authorities on the coast to enforce the terms of the Nootka Sound Convention of 1790. 

Departing…

Read More
Emanuel Bowen's 1747 map showing the boundary between Virginia and North Carolina.

The Royal Colonial Boundary of 1665 was decreed by England's King Charles II to demarcate his American colonies. It provided a survey from the Atlantic Ocean to the Mississippi River along 36 degrees, 30 minutes north latitude. The boundary now serves to divide Virginia from North Carolina and…

Read More
Point of Beginning, U.S. Public Lands

The "Land Ordinance of 1785" required that U.S. lands in the public domain be surveyed before sale, and that the surveys be made in accordance with a consistent, integrated system of lines grid-oriented to a true meridian (north-south reference line) and base line (east-west reference line),…

Read More

We hope you enjoyed this essay.

Please support America's only magazine of the history of engineering and innovation, and the volunteers that sustain it with a donation to Invention & Technology.

Donate

Stay informed - subscribe to our newsletter.
The subscriber's email address.